Upholstery Tools

Happily upholstery doesn't require a lot of tools.
This tool list is what you'll most need:

King Firm Mattress

Hammers:

King Firm Mattress

The most important tool is the upholsterer's hammer. Upholstery hammers are specially made for this specific craft.

There are three types, the favourite one

(a) Ringed shaft upholsterers hammer

(b) Head of cabriole

(c) Pear shaped shaft - Being that with the round ringed shaft.

This is the better designed and balanced hammer and has a hardened steel tipped driving face. Another type has a pear-shaped handle and a more square-cut steel head. Both these are known as tack hammers.

The remaining pattern is called a `cabriole' hammer, the main difference being a much smaller driving surface-about a quarter of an inch in diameter, whereas the average tack hammer is about five-eighths of an inch. The `cabriole' is used mainly for 'show-wood' furniture where great care is needed when tacking, not to bruise or damage the surrounding woodwork.

Hence the reason for the small head of the hammer. It is also used for `gimping', the fixing of a finished braid or gimp by the use of gimp pins.

Cutting Tools:

These consist of scissors and knives, the former should be about nine or ten inches in length and of good quality. A first-class pair of scissors will last an upholsterer all his working life.

Here again we have a choice of design. One type has a square end finish to one of its blades and the other type has a pointed end to both blades. The pointed end scissors are particularly useful when cutting loose covers. A knife is an essential tool for `trimming off' after the cover has been tacked on-particularly for hide and leather-cloths.

The knife needs to have a good sharp edge.

Web Strainers:

The thing that puzzles nearly every amateur upholsterer is how to stretch the webbing tight. This is done by a web strainer or stretcher.

There are one or two different types of these. All are made of hardwood, the simplest being a piece of wood with a groove at one end which fits over the edge of the frame being webbed.

The webbing is brought over the top and under the grooved end which is placed against the frame. With a firm handgrip it is levered downwards until the required tautness is reached. Another version, mostly used in America, is the one that has four or five spikes in the levering end.

This does away with having to pass the webbing under the grooved end, but it can damage and weaken the webbing. The type of strainer that has the slot in the main body of the wood and a piece of dowelling or rod attached is one of the most popular. With the handle upright the webbing is passed double through the slot to form a loop.

Through this loop is placed the dowelling or rod to hold it and the strain is applied in the same way. The last version is known as the lever-type strainer. This is a quick and easy method of web stretching.

The webbing is passed over the lever and allowed to hang, the leverage is then taken up in the same way with the rebated end against the frame side and a downward pressure. Another form of stretcher is the web or hide pincers.

This tool, made like pincers, has wide serrated jaws and is useful for straining short ends of webbing or hides.

Ripping-Out Tools:

These consist of an upholsterer's ripping chisel and a wooden mallet and are used to prepare the frame for a repair. The chisel end is placed against the tack and given one or two blows to remove; always hit with the grain of the wood, otherwise you may crack or chip the woodwork.

A `wood rasp' is for rounding off corners of the frame where an `edge' has to be tacked.
Screwdrivers, pincers, and a bradawl complete the general tool layout.

Upholsterers' Needles and Stitching Tools:

These are essential requirements. They consist of mattress or stitching needles and are from 8 to 16 in. in length. They have double-pointed ends with an eye about an inch from one end and are round in section. An exception is the one that is shaped triangularly for about a third of its length.

This is called a bayonet point. It is most useful for stitching built-up stuffed edges as the bayonet point is stout enough to use as a regulator-a `regulator' being the tool used for trimming or regulating the stuffing to the required place beneath its hessian covering.

It is an extra-thick needle-like tool with a point at one end and the other ends played out flat to help leverage against the side of the palm when using it. Another tool for adjusting stuffing is the stuffing iron. This is a metal tool with a fork-like end and mainly used in America. A `packing' or `spring' needle and a half-circular needle will complete the stitching tools, a further addition being three or four dozen steel skewers.

These are used to hold hessian or covers in position until they are stitched. A linen tack bag with three or four sections is required to hold the different sizes of tacks, and an upholsterer's apron which has a capacious front pocket.

This pocket is invaluable to the `ragtacker'. Tacks are held in the mouth and it is quite a shock when one first sees a handful of tin tacks thrown into the mouth.

They are brought to the lips by teeth and tongue and taken by the thumb and forefinger of the hammer hand, still holding the hammer. Experience has proved that this is the fastest and most suitable method.

The advent of the hammer with the magnetic head prompted some to alter their technique by placing the hammer head to the lips and carrying the tack to the job direct.

Upholstery Secrets - takes you by the hand and shows you step-by-step how to re-upholster any settee, chair or stool.

Upholstery Tools
King Firm Mattress

Christmas Sales Sleep Better 3-Inch Extra Firm Queen Mattress Topper 201

Dec 11, 2011 00:24:44

Christmas Sleep Better 3-Inch Extra Firm Queen Mattress Topper Deals
Click for larger image and other views

Sleep Better 3-Inch Extra Firm Queen Mattress Topper

>> Click here to update Christmas prices for Sleep Better 3-Inch Extra Firm Queen Mattress Topper <<

Christmas Sales Sleep Better 3-Inch Extra Firm Queen Mattress Topper Feature

  • 3-inch extra firm mattress topper from Sleep Better
  • 100 percent foam; spot clean
  • Adds an extra level of comfort and support to a mattress or sofa bed
  • Provides 1-4/9 pounds of density per cubic foot
  • Queen size measures 60 by 80 by 3 inches


Christmas Sales Sleep Better 3-Inch Extra Firm Queen Mattress Topper Overview

Foam toppers are very versatile and easily work on any surface you are trying to add comfort and support to. These foam toppers are available in two different levels of support: Firm or Extra Firm. Firm support provides 1-1/7-pound of density per cubic foot. Extra-firm support provides 1-4/9-pound of density per cubic foot. Spot clean. USA.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Sleep Better 3-Inch Extra Firm Queen Mattress Topper ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Sleep Better 3-Inch Extra Firm Queen Mattress Topper

Limited Offer Today!! Sleep Better 3-Inch Extra Firm Queen Mattress Topper Christmas and Cyber Monday 2011 Deals

10 X Optical Zoom Digital Camera